|
※
SPECIFICATION
※ |
| MODEL:ATX-68A(B) |
| 1.
INPUT: |
| 1.1
AC INPUT VOLTAGE: |
103
to 132 VAC or 206 to 264 VAC User Selectable |
| 1.2
AC INPUT VOLTAGE OF NORMAL OPERATION: |
115
VAC or 230 VAC |
| 1.3
AC INPUT FREQUENCY: |
47
to 63 HZ |
| 1.4
AC INPUT CURRENT: |
5.0A
RMS Max. for 115 VAC |
| 2.5A
RMS Max. for 230 VAC |
| 1.5
MAX. INRUSH CURRENT: |
40A
for 115 VAC Cold Start |
| 80A
for 230 VAC Cold Start |
| 2.
OUTPUT: |
| 2.1
CENTRAL VOLTAGE: |
+3.3V
DC |
+5V
DC |
+12V
DC |
-12V
DC |
+5VSB
DC |
| 2.2
VOLTAGE REGULATION: |
+/-4% |
+5/-4% |
+/-5% |
+/-10% |
+2/-4% |
| 2.3
MAX. CURRENT: |
6A |
12A |
5A |
0.3A |
0.75A |
| 2.4
MIN. CURRENT: |
1.2A |
2.4A |
1.0A |
0A |
0A |
| 2.5
COMBINED LOAD |
* |
| 2.6
RIPPLE&NOISE: |
50mV |
50mV |
120mV |
120mV |
100mV |
| 2.7
LINE REGULATION: |
+/-1% |
+/-1% |
+/-1% |
+/-2% |
+/-1% |
| 2.8
LOAD REGULATION: |
+/-3% |
+/-3% |
+/-4% |
+/-5% |
+2/-4% |
| 3.
OVERALL PERFORMANCE: |
| 3.1
TOTAL OUTPUT POWER: |
150W
continuous Maximum |
| 3.2
TOTAL OUTPUT POWER: |
70%
at Full Load & Nominal Input Voltage |
| 3.3
HOLD UP TIME: |
Min.
8mS at Full Load & Nominal Input Voltage
|
| 3.4
STABILITY |
+/-0.5%
after 24 hours warm up |
| 3.5
POWER GOOD SIGNAL: |
The
TTL compatible signal out with 100mS to 500mS delay after power set
up |
| 3.6
POWER FALL SIGNAL: |
The TTL
compatible signal will go down at least 1mS before +5V
below 4.75V |
| 4.
FEATURE:
|
| 4.1
SHORT CIRCUIT PROTECTION: |
All
Output equipped with short circuit |
| 4.2
OVER VOLTAGE PROTECTION: |
OVER 20%
WILL SHUTDOWN |
| 5.
ENVIRONMENTAL: |
| 5.1
OPERATING TEMPERATURE: |
0
to +40 degree C |
| 5.2
STORAGE TEMPERATURE: |
-20
to +85 degree C |
| 5.3
STORAGE HUMIDITY: |
10%
to 90% RH |
| 5.4
COOLING: |
Forced
Air Ventilation by 8cm DC BALL BEARING FAN. |
| 6.
SAFETY STANDARD: |
TUV,
UL, CSA, CB |
| 7.EMI
STANDARD: |
CE,
FCC, CNS |
| 8.
DIELECTRIC WITHSTAND (HI-POT) TEST: |
| 8.1
INPUT TO OUTPUT |
TUV/ULCSA:
1500V-1 sec. (10mA
Cut-Off) |
| Non
Safety: 800V-1 sec. (10mA Cut-Off) |
| 8.2
INPUT TO GROUND |
TUV/ULCSA:
1500V-1 sec. (10mA
Cut-Off) |
| Non
Safety: 800V-1 sec. (10mA Cut-Off) |
| 9.
ISULATION RESISTANCE: |
| 9.1
INPUT TO OUTPUT |
50MOhm
Min. |
| 9.2
INPUT TO GROUND |
50MOhm
Min. |
